Precautions when the electrochemical deburring machine is not used for a long time

Cautions when the electrochemical deburring machine is not used for a long time. Because the electrolyte of the electrochemical electrolytic deburring machine uses 15-20% sodium nitrate aqueous solution, when the electrochemical electrolytic deburring machine is not used for a long time, the electrode Crystals of salt will appear in the cathode and anode conductive blocks. These salt crystals will cause a short circuit between the cathode and the workpiece and excessive contact resistance between the anode conductive block and the workpiece, which will cause damage to the cathode, anode and workpiece. Therefore, the equipment must use tap water to rinse the cathode and anode conductive blocks of the electrode immediately after processing, so that no electrolyte remains on the cathode and anode conductive blocks of the electrode. The device should be used again after a long period of non-use. Before use, the cathode and anode conductive blocks of the electrode should be rinsed with tap water, and then the liquid pump is turned on, so that the electrolyte in the electrode hole can be more smooth, thereby eliminating hidden dangers. When installing the electrode wire of the electrolytic deburring equipment, special attention must be paid to the positive and negative polarities, the work is connected to the positive, and the electrode is connected to the negative. Otherwise, the electrode will be damaged.
Suzhou ERJIE Electromechanical Technology Co., Ltd. provides ECM electrochemical deburring machine, ECM electrolytic deburring machine, fine hole discharge machine tool, CNC EDM punching machine, CNC EDM micro hole machine, high speed EDM small hole machine, EDM Taking the technical service of tapping machine, CNC wire EDM, EDM machine tool, the company can customize various EDM special machines according to the special requirements of customers, and can provide customers with a complete set of EDM solutions.




================================================== ================================================== ======

We are manufacturer of heat treated steel pipes include quenched and tempered steel pipe, normalized steel pipe and annealed steel pipe among carbon steel pipe and alloy steel pipe. Our advantages and more services of heat treated steel pipes includes:

1) Wide range of sizes, out diameter from 20mm to 100mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 1.5um

4) Good straightness: 0.5mm/m to 2mm/m

5) Matched further processing: Grinding, polishing, straightening

5) Anti-rusty package

7) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

8) Fast delivery time

Heat Treated Steel Tube

4130 Pipe,Steel Tubing,Seamless Pipe,Annealed Tubing

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.lerenspecialsteel.com